ROGUE Slow-Setting Epoxy is a slow-setting alternative to our ROGUE Fast-Setting Epoxy. It's a two-part adhesive with a 1:1 ratio between hardener and resin. It has a working time of 30 minutes and a cure time of one hour. When mixed, the two parts form high-strength bonds through a chemical reaction between the resin and the hardener that can occur in a large temperature spectrum. When ambient temperatures pass 80-90 (27-32°C), the epoxy will harden more rapidly causing the working time and cure time to decrease substantially. It is ideal for bonding together blades and handle materials. Instructions: Preparation: Mix onto a clean, dry, and oil-free surface. Roughen smooth surfaces for better adhesion. Mix 1:1 ratio of resin and hardener. Mix resin and hardener for one minute thoroughly. For best results, apply a small amount to both surfaces and press together. Pro Tip: Use a clamp.